Why can a PCBA that has not been soaked in water still fail due to moisture?
Nov 11,2026
After many electronic devices fail, their housings show no obvious signs of water ingress, and the circuit boards have not been submerged for extended periods; however, upon disassembly, one can still observe oxidation at solder joints, discoloration of copper traces, efflorescence on the board surface, and even localized corrosion.
The problem may stem from a risk that is easily overlooked—condensation.
01 A water film can form even without water ingress.
During diurnal temperature variations, thermal cycling, or frequent start–stop operations, the surface temperature of a PCBA may briefly approach the dew point.
Water vapor in the air will condense on the board surface into tiny droplets. As these droplets continue to coalesce, they can form a continuous water film between adjacent traces, solder joints, and component leads.

If flux, salt, dust, or other contaminants remain on the board surface, the conductivity of the water film may increase further.
A case study of electronic equipment released by NASA shows that moisture once caused abnormal electrical coupling between circuit pins, demonstrating that merely “applying a protective coating” cannot replace actual verification in humid environments.
02 From moisture to failure is a progressively developing chain.
Common failure processes include:
Temperature and humidity changes
↓
Condensation droplets appear on the board surface.
↓
Pollutants dissolve or become hygroscopic
↓
Surface insulation performance degrades
↓
Leakage, electrochemical migration, or corrosion
↓
Short circuit, open circuit, or functional abnormality

As line spacing decreases, even small amounts of moisture and ionic contamination can affect high-density PCBA assemblies.
03 Electronic protection cannot rely solely on the enclosure.
A sealed enclosure can reduce the ingress of external rain and liquids, but condensation may still form inside the equipment due to temperature differences.
Therefore, reliability design typically requires simultaneous consideration of:
Enclosure sealing and drainage;
PCBA board surface cleaning;
Connector and sensitive area design;
Board-level protective coating;
High temperature and humidity, condensation, and powered-on testing.

IPC-related guidelines also list the prevention of leakage, short circuits, and corrosion caused by moisture and contamination as a typical function of conformal coatings for printed circuit boards.
04 Dual Protection: From Manufacturing to Equipment Operations and Maintenance
Hishine’s existing PCB product portfolio is divided into two parts:
Frontend Product
For the PCBA mass-production phase, we offer standard, enhanced, and ultra‑strong versions of an ultra‑thin protective nanocoating.
Backend Product
For equipment already in operation, we offer precision circuit board cleaning, electrical contact cleaning, and aerosol-based maintenance touch-up products.

From preventive measures at the manufacturing stage to equipment-level maintenance, a comprehensive PCB protection strategy is established.
If your product is experiencing issues such as moisture condensation, salt spray corrosion, or occasional short circuits, you can begin by conducting tests on actual circuit boards to assess the source of contamination, the operating environment, and the appropriate protective coating process.
Sample Testing | Model Selection | Process Validation | Maintenance and Touch-Up Coating | Volume Supply
Previous: Electronic protective coatings: why can’t you judge them by thickness alone?
Next: Visible Clarity, Invisible Heat Insulation | A Comfort Upgrade for Car Sunroof Glass
Other Blogs
Nov 17,2026
Standard, Enhanced, and Ultra versions—how should you choose?
The product name is only a preliminary designation; the actual model is determined by the operating environment, fluorine content, board structure, and project validation results.