Standard, Enhanced, and Ultra versions—how should you choose?


Nov 17,2026

Faced with multiple models of ultra-thin protective nano-coatings, the question customers ask most often is:

Standard, Enhanced, and Ultra—so which one should you choose?

The right way to choose is not simply to assume that “higher is better,” but rather to first answer four questions.

 

01 In what environment is the product used?
First, it is necessary to identify the primary risks facing the product:

Normal indoor humidity;
Occasional water dripping or liquid splashing;
Outdoor temperature and humidity variations;
Coastal or industrial salt spray;
Condensation inside the equipment;
Long-term operation under high humidity;
Environments with higher requirements for insulation and corrosion resistance.
The more complex the environmental risks, the more necessary it is to conduct pilot testing using enhanced or ultra‑enhanced versions.

 

02 Does the customer have any requirements regarding fluorine content?
Hisun-Mek’s front-end products are available in both fluorine-containing and fluorine-free formulations.

Fluorine-containing products
PCP-S0002-FP-FL: Standard Edition;
PCP-S0004-FP-FL: Enhanced version;
PCP-S0005-FP-FL: Super Strong Version;
PCP-S0006-FP-FL: Supercharged version.
Fluoride-free products
PCP-S0002-FP-NF: Standard Edition;
PCP-S0004-FP-NF: Enhanced version;
PCP-S0006-FP-NF: Supercharged version.
The presence or absence of fluorine does not simply reflect a difference in performance; rather, it represents distinct material technology pathways.

 

03 What areas on the board must not be coated?
The following locations typically require focused analysis or shielding:

Socket and connector contacts;
Flexible ribbon cable connector;
Test point;
Large-aperture buttons;
Microphones and acoustic devices;
Subsequent welding area;
Conductive and grounding areas;
The interface in direct contact with the heat sink.
The more complex the panel structure, the more essential it is to first determine the construction method and masking plan.

 

04 Is it for mass production on the assembly line, or for equipment maintenance?
For PCBA mass production, choose FP front-end industrial bulk or bottled products.

If used for on-site maintenance of equipment already in service, it can be used to assess:

PCP-S0004-BP-FL Ultra-Thin Protective Nano-Coating Reinforced Version for PCB Boards

This product is packaged in a 400g aerosol can and is primarily used for maintenance recoating and moisture protection of equipment circuit boards.

Recommended Selection Process
Confirm the operating environment

↓

Confirm fluorine-containing or fluorine-free requirements

↓

Analyze the panel structure and sensitive components

↓

Choose the Standard, Enhanced, or Ultra version.

↓

Complete sample coating

↓

Conduct environmental and electrical testing

↓

Small-batch trial production

↓

Formal import

 

Special Note
Both PCP-S0005-FP-FL and PCP-S0006-FP-FL are listed as the heavy-duty version in the latest product catalog. For specific differences in formulation and application guidelines, please refer to the most recent TDS and selection recommendations provided by the Technical Department.


Previous: None

Next: Electronic protective coatings: why can’t you judge them by thickness alone?